8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Glue or epoxy for Anscovision name or diagram plates?

- UBBFriend: Email this page to someone!    
Author Topic: Glue or epoxy for Anscovision name or diagram plates?
Norman Hixenbaugh
Junior
Posts: 24
From: Tulsa, OK
Registered: Apr 2009

- posted March 29, 2013 06:46 PM      Profile for Norman Hixenbaugh   Email Norman Hixenbaugh   Send New Private Message       Edit/Delete Post 
What adhesive do any of you use to re-affix the thin metal instruction plate, situated above the lens, feed and film exit channels, on the Anscovision projectors. The back is slightly tacky and presses against the metal housing.

 |  IP: Logged
Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

- posted March 29, 2013 07:29 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
This works well.

-

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2