8mm Forum: Chinon 2000 power cord

»	8mm Forum » 8mm Forum » Chinon 2000 power cord

UBBFriend: Email this page to someone!

Author

Topic: Chinon 2000 power cord

Dave Hackett
Junior
Posts: 7
From: Cedar Park, TX, USA
Registered: Dec 2015

posted December 22, 2015 04:49 PM

need to know what power cord looks like for Chinon 2000GL.
looking at one for sale without cord and would like to substitute something to test out.
Is power cord polarized?

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted December 22, 2015 08:02 PM

The Chinon 2000GL takes a two prong cord. It's possible you could DIY a cord just by cutting off the end of an old extension cord and attaching a couple of round insulated connectors to the wires that would fit onto the pins of the projector. You could also try and find an old two prong battery adapter cord. The holes in these some times can be made to fit.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009

posted December 24, 2015 07:35 PM

I've also seen kitchen appliance cords at Menard's that might work.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2