8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » LED Replacement projector BULB

- UBBFriend: Email this page to someone!    
Author Topic: LED Replacement projector BULB
Bill Kubiak
Junior
Posts: 9
From: miami fl
Registered: Jun 2012

- posted January 27, 2016 11:37 AM      Profile for Bill Kubiak   Email Bill Kubiak   Send New Private Message       Edit/Delete Post 
Hi, I have a Sankyo Dualux 1000, is there an LED replacement bulb available for this projector?

 |  IP: Logged
Ty Reynolds
Film Handler

Posts: 93
From: Calgary, Alberta, Canada
Registered: Nov 2015

- posted January 27, 2016 12:02 PM      Profile for Ty Reynolds   Author's Homepage     Send New Private Message       Edit/Delete Post 
There is, from forum member Myron Baron. I highly recommend it.

 |  IP: Logged
Bill Kubiak
Junior
Posts: 9
From: miami fl
Registered: Jun 2012

- posted January 27, 2016 01:49 PM      Profile for Bill Kubiak   Email Bill Kubiak   Send New Private Message       Edit/Delete Post 
DO you know where I can get one, and what the bulb number is? I know it is a weird shaped bulb

 |  IP: Logged
Ty Reynolds
Film Handler

Posts: 93
From: Calgary, Alberta, Canada
Registered: Nov 2015

- posted January 27, 2016 02:26 PM      Profile for Ty Reynolds   Author's Homepage     Send New Private Message       Edit/Delete Post 
Myron's website address is:

http://www.dvds2envy.com

Click on the CXR/LED conversion link.

 |  IP: Logged
Myron Baron
Film Handler

Posts: 49
From: Easton, Pa 18045
Registered: Jan 2008

- posted January 28, 2016 11:22 AM      Profile for Myron Baron   Author's Homepage   Email Myron Baron   Send New Private Message       Edit/Delete Post 
Bill:
My name is Myron Baron. I have a replacement kit for the CXL/CXR 8V 50 W Bulb. My replacement kit is an LED device that replaces the CXL/CXR bulb. Takes 10 min to install. No drilling holes or disconnecting of wires, Just remove the old bulb insert the LED device and connect two wires. check it out.
Myron

 |  IP: Logged
James Wilson
Expert Film Handler

Posts: 230
From: Norwich, UK
Registered: Jan 2015

- posted January 28, 2016 11:56 AM      Profile for James Wilson   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi Myron,

Will these kits work in the UK?

--------------------
James Wilson

 |  IP: Logged
Myron Baron
Film Handler

Posts: 49
From: Easton, Pa 18045
Registered: Jan 2008

- posted January 29, 2016 07:30 AM      Profile for Myron Baron   Author's Homepage   Email Myron Baron   Send New Private Message       Edit/Delete Post 
Bill:
I know they sell voltage adapters for different countries, as I use them when I travel, my unit uses an input power supply 110v AC 60 cycles out put 12vdc 3 amps, that's all the info you will need. I'm sure they have have an adapter for 110vac 60 cycles. Let me know how you make out.
Regards
Myron Baron

Bill try this link
http://www.theroamingboomers.com/the-ultimate-electricity-guide-for-world-travelers/

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2