8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Is this a normal amount of crud?

 - UBBFriend: Email this page to someone!    
Author Topic: Is this a normal amount of crud?
John Vice
Junior
Posts: 21
From: Lexington, KY, USA
Registered: Sep 2016


 - posted October 05, 2016 05:20 PM      Profile for John Vice   Email John Vice   Send New Private Message       Edit/Delete Post 
First time cleaning films with Film Renew and PecPads. I seem to be getting more gunk than I anticipated. Is this a normal amount for a 50' reel?

 -

 |  IP: Logged

Guy Taylor, Jr.
Jedi Master Film Handler

Posts: 606
From: Galveston, Texas, U.S.A.
Registered: Mar 2007


 - posted October 05, 2016 06:00 PM      Profile for Guy Taylor, Jr.     Send New Private Message       Edit/Delete Post 
That is typical, yes. You will be surprised at how smooth the film runs thru the projector wants it has been cleaned and lubricated.

--------------------
Guy Taylor

 |  IP: Logged

Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003


 - posted October 06, 2016 10:09 AM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
John,

I've seen worse!

By the way, this could be my favorite topic title ever!

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted October 06, 2016 12:36 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
quote:
Is this a normal amount of crud?
-for an engine dipstick it's nearly sterile.

-for a Kleenex...call your Doctor!

Seems to me I remember that particular shade of green cleaning Kodachrome...it's been a while, though.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Joe Caruso
Film God

Posts: 4105
From: USA
Registered: Jun 2003


 - posted October 06, 2016 03:07 PM      Profile for Joe Caruso     Send New Private Message       Edit/Delete Post 
I know crud when I see it - I'll leave that joke to everyone else - Shorty

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted October 06, 2016 03:47 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I'm not sure that's crud at all....

-might be schmutz!

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Osi Osgood
Film God

Posts: 10204
From: Mountian Home, ID.
Registered: Jul 2005


 - posted October 07, 2016 11:50 AM      Profile for Osi Osgood   Author's Homepage     Send New Private Message       Edit/Delete Post 
Neah! We have Smutz running all around our neighborhood, with no dog collar or chains. I wouldn't mind too much but they get into our garbage ... to which, when I see it, I say ....

" Ahhh SMUTZ! "

--------------------
"All these moments will be lost in time, just like ... tears, in the rain. "

 |  IP: Logged

Steven J Kirk
Jedi Master Film Handler

Posts: 873
From: Southern England
Registered: Apr 2008


 - posted October 07, 2016 02:48 PM      Profile for Steven J Kirk   Email Steven J Kirk   Send New Private Message       Edit/Delete Post 
I'd say that is the top end of 'normal'. The film needed cleaning. Discard the cloth every 50ft. But use both sides. Good luck...

--------------------
VistaVision
Motion Picture High-Fidelity

 |  IP: Logged

John Vice
Junior
Posts: 21
From: Lexington, KY, USA
Registered: Sep 2016


 - posted October 07, 2016 04:10 PM      Profile for John Vice   Email John Vice   Send New Private Message       Edit/Delete Post 
That's probably 50' worth of gunk, but honestly, I usually switch out pads before I finish a roll.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2