8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bulb Lif Code

- UBBFriend: Email this page to someone!    
Author Topic: Bulb Lif Code
Graham Hillary
Film Handler

Posts: 15
From: Irlam, Greater Manchester, UK
Registered: Dec 2016

- posted February 09, 2017 01:22 PM      Profile for Graham Hillary   Email Graham Hillary   Send New Private Message       Edit/Delete Post 
Good evening all (or good morning perhaps depending where in the world you are!) some information relating to bulbs would be appreciated.
I am aware of the LIF code, that I guess puts bulbs into groups dependant on their interchangability? Specifically, is for instance an 8W 50V A1/185 interchangeable with a 8V 50V A1/17
Many thanks
Graham

--------------------
"You need to get out more,there's more to life than model trains" they said!
Here I am. They still aren't happy.

 |  IP: Logged
Brian Fretwell
Phenomenal Film Handler

Posts: 1785
From: London, UK
Registered: Jun 2014

- posted February 09, 2017 04:27 PM      Profile for Brian Fretwell   Email Brian Fretwell   Send New Private Message       Edit/Delete Post 
Don't know the A1/185 but the halogen replacement for the A1/17 was the A1/263.

 |  IP: Logged
Will Trenfield
Jedi Master Film Handler

Posts: 506
From: Shrewsbury, Shropshire, UK
Registered: Mar 2016

- posted February 09, 2017 06:42 PM      Profile for Will Trenfield   Email Will Trenfield   Send New Private Message       Edit/Delete Post 
The A1/185 looks to be similar to the A1/17 and just as expensive going by eBay.

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2