8mm Forum: Elmo FP-C - Green Button Question

»	8mm Forum » 8mm Forum » Elmo FP-C - Green Button Question

UBBFriend: Email this page to someone!

Author

Topic: Elmo FP-C - Green Button Question

John Berman
Junior
Posts: 4
From: London, UK
Registered: Dec 2018

posted December 07, 2018 06:41 AM

Hi

My first post so please be gentle

I have bunch of 8mm Films so recently bought myself a Iflord Elmo FP-C projector from a second hand shop, I have had a good look at it and nothing appears to be broken etc (tested the lamp which is fine.

My only issue so far is the Green Button (not sure of its correct name) it seems stuck in the forward position, i have attempted to push it back but it does not want to move (did not want to push it to hard) looking at the mechanism its not obvious why it stuck, pointers really appreciated

--------------------
Regards
John Berman

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted December 07, 2018 01:01 PM

Hi John and welcome to the Forum. Have you run film through the projector yet? I believe the green "bottom" you are referring to is the "threading lever." To run the film you first push down the threading lever, then turn the lamp switch to "On." Next set the main motor switch to "Run." Insert the trimmed end of the film into the projector. When the film reaches the take-up reel it will automatically load onto the take-up reel which should cause a slight tug on the film. That tug should disengage the threading lever pulling it back. However, if the film does not autoload onto the reel and you have to thread the reel by hand or if there isn't a tug you can manually turn the take-up reel to the right with your hand to create the tug.

Try this and let us know if this solved the problem.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

John Berman
Junior
Posts: 4
From: London, UK
Registered: Dec 2018

posted December 07, 2018 01:27 PM

Jancie

Worked a treat, lamp came on and movie played - so exciting to see it work

Thanks so much

--------------------
Regards
John Berman

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted December 07, 2018 01:57 PM

Great John! Do you need a User Manual? If so...just PM me your email address. I'll send you a PDF.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

John Berman
Junior
Posts: 4
From: London, UK
Registered: Dec 2018

posted December 13, 2018 10:42 AM

Janice

Cant seem to PM you I get: Sorry, either the user or the board administrator is blocking access to this email address

john

--------------------
Regards
John Berman

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted December 13, 2018 11:37 AM

Make sure you are clicking on the PM link icon and not the email icon.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2