8mm Forum: Elmo FP-C

»	8mm Forum » 8mm Forum » Elmo FP-C

UBBFriend: Email this page to someone!

Author

Topic: Elmo FP-C

Todd Silk
Junior
Posts: 2
From: Hayden, ID, USA
Registered: Oct 2019

posted October 18, 2019 09:38 AM

I'm looking for a wiring diagram for a Elmo FP-C projector or any suggestions on what to check. The little pilot light comes on behind the indicator that shows the film selected. However the main lamp or the motor does not turn on. Any ideas?

Todd

| IP: Logged

Todd Silk
Junior
Posts: 2
From: Hayden, ID, USA
Registered: Oct 2019

posted October 22, 2019 07:27 AM

Found the problem. Lamp not turning on was because it has a lockout when it is in threading mode. The second problem was a broken wire on the speed control reostat.

Everything works now

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted October 22, 2019 12:00 PM

Way to go Todd. Enjoy your films!

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2