8mm Forum: Elmo GS800 motor pulley needed

»	8mm Forum » 8mm equipment for sale/trade » Elmo GS800 motor pulley needed

UBBFriend: Email this page to someone!

Author

Topic: Elmo GS800 motor pulley needed

Pete Richards
Master Film Handler

Posts: 302
From: Australia
Registered: Sep 2010

posted October 19, 2014 06:20 AM

The pulley wheel attached to the motor in my GS800 has a split in it, (the white nylon/plastic wheel that the belt goes around)

Does anyone know where I can get a replacement, also looking for replacement bulbs as well.

| IP: Logged

Pete Richards
Master Film Handler

Posts: 302
From: Australia
Registered: Sep 2010

posted October 26, 2014 05:43 AM

Apparently the GS600 pulley is the same, so if anyone has one of those laying around....

| IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted October 26, 2014 06:55 AM

Sorry I don`t but I know John White knows a chap can make pulleys.

Best Mark.

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted October 27, 2014 08:32 AM

It sounds like something that should be still be available commercially, either from an industrial supplier or if it is very small maybe a hobby supplier.

What is the shaft diameter, the belt diameter and the pulley diameter?

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007

posted October 27, 2014 08:56 AM

Replacement lamps for the GS-800 are widely available on eBay, other online vendors, some local cameras and lighting stores.

It uses a 100 W, 12 V, EFP lamp.

Jon

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2