8mm Forum: Singer Instaload 16 Model/Product

»	8mm Forum » 16mm Forum » Singer Instaload 16 Model/Product - 2120

UBBFriend: Email this page to someone!

Author

Topic: Singer Instaload 16 Model/Product - 2120

Joe Padavic
Junior
Posts: 8
From: Shawnee, Ks
Registered: Jan 2011

posted January 22, 2011 08:40 AM

I am in need of the "circuit board" that is mounted upright for this 16mm Singer Instaload. Any assistance would be appreciated. Thanks, Joe.

--------------------
Selling memories, emotions and teardrops of happiness

| IP: Logged

Richard C Patchett
Master Film Handler

Posts: 424
From: Flint Mi 48506
Registered: Dec 2007

posted January 22, 2011 07:20 PM

Greetings Joe
Need to know the model number of this projector and any markings on the board.
I may have one that is rebuild $60.00 plus mailing
Contact me at patchetts@ameritech.net
Whats wrong with yours?

--------------------
RC’s Classic Collection
16 mm Parts & Service
Elmo, Eiki, Bell & Howell +
http://www.rcsclassic16mm.com/

| IP: Logged

Joe Padavic
Junior
Posts: 8
From: Shawnee, Ks
Registered: Jan 2011

posted January 22, 2011 09:04 PM

I believe it is a model/product # is 2120.
Neither the lamp nor the audio lamp work. As best as I can remember the local camera repair shop says the pre-amp board is blown. Without pulling the board the only markings I can read is is "3ASB" stamped on the back side of the board.

--------------------
Selling memories, emotions and teardrops of happiness

| IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

posted January 23, 2011 05:26 PM

do those have fuses?

--------------------
jim schrader
"Let's see “do I have that title already?"

| IP: Logged

Joe Padavic
Junior
Posts: 8
From: Shawnee, Ks
Registered: Jan 2011

posted January 24, 2011 08:42 AM

Looks like there is one on the lower left of the board. It looks good.

--------------------
Selling memories, emotions and teardrops of happiness

| IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003

posted January 24, 2011 09:59 AM

A little bit off topic...

Since I am not into 16mm and just found this brand only available in 16mm format....is Singer 16mm is THE SAME company with Singer Sewing Machine?

thanks

--------------------
Winbert

| IP: Logged

Joe Padavic
Junior
Posts: 8
From: Shawnee, Ks
Registered: Jan 2011

posted January 24, 2011 11:21 AM

Originally produced by Graflex, which in later years was acquired by General Precision Equipment Company. Then Singer bought GPE in 1968.

--------------------
Selling memories, emotions and teardrops of happiness

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2