8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Eiki EX 2000 N-2

 - UBBFriend: Email this page to someone!    
Author Topic: Eiki EX 2000 N-2
Tom Dee
Film Handler

Posts: 62
From: Phoenix AZ, USA
Registered: Oct 2014


 - posted January 27, 2015 11:25 AM      Profile for Tom Dee   Email Tom Dee   Send New Private Message       Edit/Delete Post 
I have the chance to buy one of these machines, but to be honest I dont really know that much about 16mm projectors. I would appreciate any info on this model, and also any problems that theses machines might of had and what to look out for.

Thanks
Tom

 |  IP: Logged

Elyas Tesfaye
Jedi Master Film Handler

Posts: 520
From: Winnipeg, Manitoba, Canada
Registered: Nov 2012


 - posted February 03, 2015 07:11 PM      Profile for Elyas Tesfaye     Send New Private Message       Edit/Delete Post 
Hi Tom,

I don't know this particular model but based on the performance of my EIKI Super Slim Sloan Liam, I would bet it's a great work horse. In any case, I would take a reel to try it out in advance to see if it 7 running [Wink]

Best,
Elyas

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted February 04, 2015 03:16 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
This projector is an up-market model with a high power xenon lamp. It gives a great light output but the downside is the very high cost of replacing the lamps.

If you are not really into 16mm sound I suggest you pass on this particular model.

Should you decide to start collecting 16mm films I suggest you look for a projector which uses lamps which are readily available and at a much lower cost.

--------------------
Maurice

 |  IP: Logged

Tom Dee
Film Handler

Posts: 62
From: Phoenix AZ, USA
Registered: Oct 2014


 - posted February 06, 2015 08:39 PM      Profile for Tom Dee   Email Tom Dee   Send New Private Message       Edit/Delete Post 
Thanks Guys for the good info

 |  IP: Logged

Richard C Patchett
Master Film Handler

Posts: 424
From: Flint Mi 48506
Registered: Dec 2007


 - posted February 07, 2015 11:46 AM      Profile for Richard C Patchett   Author's Homepage     Send New Private Message       Edit/Delete Post 
Greetings
If you need the service and parts manual
I have this in stock
There on my web site
#4407

EX2000-A&N
Includes the N series Service Manual and the 2000 N replacement parts list.
$35.00
RC

--------------------
RC’s Classic Collection
16 mm Parts & Service
Elmo, Eiki, Bell & Howell +
http://www.rcsclassic16mm.com/

 |  IP: Logged

Roger Shunk
Jedi Master Film Handler

Posts: 604
From: Phoenix, AZ
Registered: Nov 2011


 - posted February 07, 2015 06:58 PM      Profile for Roger Shunk   Author's Homepage     Send New Private Message       Edit/Delete Post 
Tom,
Sent you a PM
Roger

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2