8mm Forum: Elmo 16cl questions

»	8mm Forum » 16mm films for sale/trade/wanted » Elmo 16cl questions

UBBFriend: Email this page to someone!

Author

Topic: Elmo 16cl questions

Kenneth DePriest Jr
Film Handler

Posts: 64
From: severn MD
Registered: Aug 2012

posted February 25, 2015 10:52 AM

where can I get a 16cl that is the "latest version" with PROPER rollers installed, there are those who make them out of rubber tubing and I dont want that, how many "versions" were there? is there a way you can tell if the take up mod has been done without taking the plate off? thanks!

| IP: Logged

Harrison Bradley
Junior
Posts: 28
From: Philadelphia, PA, USA
Registered: May 2012

posted February 25, 2015 05:45 PM

Order some new rollers here from Larry Urbanski http://moviecraft.tripod.com/supplies.html
He makes them to the original specs. I don't know how many version of the 16-CL are but Urbanski sells two different sets depending on whether or not one of the shafts has a spring on it or not.

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted February 25, 2015 06:56 PM

I bought my rollers from Urbanski. They are as good if not better than the originals.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2