8mm Forum: Siemens 2000 projector: resistor wanted

»	8mm Forum » 16mm equipment for sale/trade » Siemens 2000 projector: resistor wanted

UBBFriend: Email this page to someone!

Author

Topic: Siemens 2000 projector: resistor wanted

Phil Clarke
Junior
Posts: 26
From: London, United Kingdom
Registered: May 2014

posted February 16, 2016 01:08 PM

Hello all

Siemens 2000 16mm Projector

I'm after a lamp resistor for this splendid machine. I need the 1000w 120v version. Does anyone have one for sale, if so please drop me a line.

Alternatively I gather that the resistors were also made available as a kit with various possible positions for fitting the spiral on the ceramic plug, depending on the required configuration. Does anyone have more info ?

thanking you
cheers
Phil

| IP: Logged

Thijs de Kort
Film Handler

Posts: 51
From: Tilburg, Netherlands
Registered: Jun 2015

posted February 17, 2016 02:36 AM

If memory serves me correctly Edwin van Eck has these for sale.
He also has some other parts for these projectors for sale and the full information about them as well.
Here's a link to his website: http://www.van-eck.net/itable.php?lang=en&size=0&cat=film&merk=151&type=2000

| IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005

posted March 03, 2016 01:00 PM

the thick wire wounded resitor on top of ceramic body can easily be shorten by a piece of copper wire. Then you have converted lamp voltage for use with a 110V transformer.
The thin wire wounded resistor at bottom of ceramic body can be shorten in similar way. Siemens did employ here a small wire wounded resistor for softer regulation.
If required I could measure Ohm value, when I am back home.

Josef

PS: If you use original Siemens "Regelfix" adjustable transformer
with special 3 pole socket, we can supply special 3 pin plug to connect it to mains cord of projector.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2