Author
|
Topic: ST1200 D/HD Noise (All Should read this)
|
Chip Gelmini
Phenomenal Film Handler
Posts: 1733
From: Brooksville, FL
Registered: Jun 2003
|
posted October 10, 2004 11:42 AM
Although I am having trouble with one projector currently, this will be a general question.
My question:
How much noise should an ST1200 D/HD make when running film.
I have 3 pairs of these machines. No two sound the same. With or without film, the noises are strikingly different between all 6 units.
There is one pair of HD's with optical. There is one with minimal noise, and the second less noisy but minimum noise as well.
There is one pair of HD's magnetic only. One is very quiet, the other, very noisy. Both seem to run fine.
There is a pair of 1200D units with optical. They are not real noisy, but make more noise so I would say would be slightly above minimum.
And to classify minimum noise, I would say it would be the first 1200 HD with optical. This amount of noise would have to be defined as, not to loud or quiet, but acceptable, and/or seems to be running fine. In other words, more noise could or would mean a problem might be in the near future.
I would be interested in any comments.
Chip G
| IP: Logged
|
|
|
|
|
|
|
|
|