posted December 05, 2006 05:53 PM
Hi just taken a joined nylon hot weld belt jobby from my std 8 machine. Its 295mm long maybe 3mm or just under 3mm across. I would say 4mm would be better looking at the pulleys. Anyone please got a belt from something like that so I can pin one down to buy. It runs over a 3rd roller to turn the lmap fan if you will. Do you think at 4mm I may need 300mm or should I stick at 295. Many thanks in advance Mark.
posted December 06, 2006 03:39 AM
Sorry I meant I was after pinning down a proper endless belt, however thanks for the very handy link. Best Mark. PS think I may have one from the I sell projector belts chap in the US, very helpful but still open to suggestions. Thanks Mark.