8mm Forum: good choice? eumig 610D

»	8mm Forum » 8mm Forum » good choice? eumig 610D

UBBFriend: Email this page to someone!

Author

Topic: good choice? eumig 610D

Louis Li
Expert Film Handler

Posts: 159
From: SG
Registered: Feb 2007

posted May 02, 2007 08:21 AM

was actually asking for opinions to decide between

1. Eumig 610D
2. Sankyo Deluxe 2000H
3. chinon Sound 9500mv

think ill go for the 610D because i love the simplicity of it.
Any current users of this particular model?

I do need to know where i can find the bulb for it though
and if it has the 'interchangeble sprocket wheel' that the 800D series have.
or is this model different?

[ May 02, 2007, 10:35 AM: Message edited by: Louis Li ]

| IP: Logged

Knut Nordahl
Expert Film Handler

Posts: 173
From: Norway
Registered: Dec 2005

posted May 04, 2007 02:12 AM

I know the little brother of both the 610D and the sankyo dualux 2000, the 1000.

They are both dual machines and you change between reg/super by flicking a switch. No need to replace a sprocket wheel.

The 610D has 18 - 9 - 6 - 3 - still frame projection
the dualux is 18 TO 9 fps (and by removing the backside you can gain access to the speed controll and remove the stop pin, hence increecing the fps area slight. NOTE: I'm speaking of the 1000 but the 2000 is probably the same)

Both the 610 and the 2000 use 12/100 watt lamp
http://www.super8stuff.com/lamps.html

I use the 607D in a telecine setup today an am very pleaced with the performance of this little machine. Then again I like Eumig.
I'd go for the 610D

I dont know the chinon Sound 9500mv, but that seems to be another "type" of projector.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2