8mm Forum: Eumig 607D Question

»	8mm Forum » 8mm Forum » Eumig 607D Question

UBBFriend: Email this page to someone!

Author

Topic: Eumig 607D Question

William Walsh
Junior
Posts: 8
From: Maryland
Registered: Aug 2008

posted July 05, 2009 02:24 PM

Greetings,

To save some time and gas does anyone know where I can purchase a plug for this unit? Any other adjustments I will need to make to use this projector?

Thanks,

Bill

Projector

| IP: Logged

Jon Addams
Jedi Master Film Handler

Posts: 638
From: New York, NY, USA
Registered: Apr 2007

posted July 05, 2009 02:36 PM

Hello Bill,

A cord to match the original plug is almost impossible to find these days. I suggest you remove the original plug and install a standard three-prong (computer-type) connector in its place.
You can find those anywhere and it’s not a difficult job.

Regarding any other adjustments to use the projector, it’s hard to tell, you may not need any. You should be able to know better once you run the projector. [Wink]

Good luck

Jon

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2