8mm Forum: Eumig 810D

»	8mm Forum » 8mm Forum » Eumig 810D - S Sleeve

UBBFriend: Email this page to someone!

Author

Topic: Eumig 810D - S Sleeve

Colin Browne
Junior
Posts: 6
From: Dublin,Ireland
Registered: Sep 2008

posted March 18, 2009 05:20 AM

Hi,
finally got a dual guage Eumig 810d for standard 8. On the take up arm there is a spindle that the reel fits on, on this machine it is the thinner type sleeve, not sure what it's called, I guess I need to get the thicker type sleeve which did not come with it, can I get some type of adapter or indeed a new sleeve to replace the existing one?, any advice appreciated,
Colin

--------------------
Colin Browne
www.irishvideo.ie

| IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007

posted March 18, 2009 10:36 AM

Colin, any reel adapter will do the trick, though it's nice to have the Eumig sleeve because it snaps in place. Or, use true standard 8 reels with the smaller 3/16" hole.

| IP: Logged

Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008

posted March 18, 2009 12:04 PM

Colin if you give me your address I can mail you out a couple of the different types of reel adapters as I have a small box filled with them. you can email me offline at
aytab at aol dot com

Cheers
Dino

--------------------
"You're too Far Out Miss Lawrence"

| IP: Logged

Colin Browne
Junior
Posts: 6
From: Dublin,Ireland
Registered: Sep 2008

posted March 18, 2009 12:20 PM

Thanks for your advice and for your kind offer Dino, I have sent you an E-mail. One of the small reels has the smaller diameter hole but the rest are the larger type - Colin

--------------------
Colin Browne
www.irishvideo.ie

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2