I am hoping someone can help me. My Sankyo projector lamp comes on in reverse mode but not in forward mode. I should point out that I haven't used it in over 20 years. ( I just replaced the motor belt to get it running.) I can watch a movie in reverse mode. Is it possible that the lamp needs replacement or is something else preventing the lamp from coming on in forward mode?
Barry Fritz
Phenomenal Film Handler Posts: 1061
From: Burnsville, MN, USA
Registered: Dec 2009
posted February 22, 2012 11:40 AM
If it worked ok before you put it away 20 years ago, it may be a corrosion issue. With the unit unplugged, switch it back and forth from the forward position multiple times and then give it a try.
posted February 22, 2012 02:44 PM
Thanks, Barry for replying. I tried your suggestion but the lamp does not come on in forward. Also there is no apparent evidence of any corrosion. The projector was stored in its original box in a dark dry closet. Any other thoughts?
Posts: 534
From: Gold Coast. Australia
Registered: Jan 2005
posted February 24, 2012 04:22 AM
Hi Louis
Sounds like the function selector switch is faulty. If you manage to find another good switch to use it is still quite a job to swap them over. There is a fair bit to dismantle & many wires to swap over. Good luck looking for a selector switch that works properly.
dogtor frankarnstein
-------------------- At Projector Heaven the Focus is always on Detail.