8mm Forum: new S8mm adapters

»	8mm Forum » 8mm Forum » new S8mm adapters

UBBFriend: Email this page to someone!

Author

Topic: new S8mm adapters

Wayne Tuell
Master Film Handler

Posts: 488
From: Minden, NV
Registered: Jul 2009

posted August 23, 2010 11:40 AM

I just picked up a set of S8mm adapters this weekend from Neil Research Labs. I opted for the top of the line brass adapters over the mid-grade aluminum or econo hard plastic....to make it short, the quality is as good as the Film-O-Clean. Unlike the Neumade adapters, these fit ALL reels I tried them on. If you have the Neumades you know what I mean...Newmades have to be punched out of certain reels such as the Elmo auto-reel because they are made too large to begin with.

Neil Research Labs adapters have a wider base, set screw, registry pin (guess that is what you call it), AND a screw on locking hub. Sometimes I "cheat" when re-winding S8mm and use a 16mm projector as a power winder instead of going out and using my power winder [Cool]

Since these have the screw on hubs, I can now "cheat" and find a use for my 16mm Bell & Howell 2585 that just collects dust. [Wink]

[ August 23, 2010, 11:27 PM: Message edited by: Wayne Tuell ]

--------------------
www.16mmDrive-InFilms.com

| IP: Logged

Roy Neil
Expert Film Handler

Posts: 203
From: Menlo Park, CA
Registered: Sep 2007

posted August 25, 2010 01:40 AM

Nice pics Wayne !

Glad you are happy with the adaptors.

I have not had a chance to get them listed on my website yet, but Wittner-Cinetec has ...

http://www.wittner-kinotechnik.de/katalog/03_verbr/g_filmoclean.php

http://www.wittner-kinotechnik.de/neu/news2010.php#20100730-1

( note pics on this page are of a 'prototype' adaptor sent to Wittner during the development, the first link displays photos of the production adaptors )

They even posted the list I sent them detailing the production cycle ... so if anyone is wondering what I do to actually make the adaptors then you can go see the laundry list.

| IP: Logged

Roy Neil
Expert Film Handler

Posts: 203
From: Menlo Park, CA
Registered: Sep 2007

posted August 25, 2010 10:23 PM

Thanks for the emails everyone - Im sorry I should have mentioned that I am currently out-of-stock but should have inventory within a few weeks. Im in the process of moving and will commence production once that is completed.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2