8mm Forum: sankyo dualux 1000 belt

»	8mm Forum » 8mm Forum » sankyo dualux 1000 belt

UBBFriend: Email this page to someone!

Author

Topic: sankyo dualux 1000 belt

John Jinks
Junior
Posts: 5
From: East Hampton,NY 11937
Registered: Feb 2008

posted July 09, 2014 06:31 PM

Hi,
I just got a sankyo dualux 1000 and need the belt size if anyone has it - I might be able to find an o ring to fit locally. Also since the belt is not on should this affect either spindle not turning as both don't. AND the lamp looks good - no burn marks and I couldn't see any broken filament either. Any help would be appreciated.
Thanks a bunch,
John

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted July 09, 2014 06:58 PM

Try 2-5/8" O.D. 1/8" width

Without the main motor belt neither the take-up nor the supply reel will turn.

Here's my video on how to install the new belt.
https://www.youtube.com/watch?v=rog95Djbtpc

I don't believe the lamp will project until you have film passing through the gate and caught by the take-up reel.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

John Jinks
Junior
Posts: 5
From: East Hampton,NY 11937
Registered: Feb 2008

posted July 09, 2014 08:01 PM

Thanks Janice,
I'm off to find a belt - can't wait to see the 8mm films from the 50s and 60s again.
John

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2