8mm Forum

my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Removing the rotor from a Sankyo 2000h

 - UBBFriend: Email this page to someone!    
Author Topic: Removing the rotor from a Sankyo 2000h
Ian Brennan
Posts: 11
From: Sydney
Registered: Mar 2013

 - posted June 03, 2014 02:47 AM      Profile for Ian Brennan   Email Ian Brennan   Send New Private Message       Edit/Delete Post 
Hi there, I'm looking for some help. I want to remove the rotor blades from my Sankyo 2000h - but having partly stripped it down I'm now stuck.

To remove the blades, it looks like I have to remove the shaft - well that's what I did when I stripped a 100h.

It has a bearing that's not accessible from the "belt-side" of the projector, as the case has a casting - you can see it behind the fan here http://1drv.ms/1or60MQ

But it looks like it could be removed from the "lamp-side" - it seems that it's on a chassis that is removable.

But for the life of me I can't see how this is done. I don't really want to get in there with a Dermal and slice the rotors off, but I haven't the foggiest idea what to do next.

Anyone got an idea? Or a PDF of the service manual for the 2000h?

Even hints would be useful.... I'm that stuck!
Thanks in advance


 |  IP: Logged

All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation