8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » ELMO ST 600 M 2 track

 - UBBFriend: Email this page to someone!    
Author Topic: ELMO ST 600 M 2 track
Arturo Glez
Film Handler

Posts: 65
From: Barcelona, Spain
Registered: Feb 2015


 - posted June 30, 2016 05:27 PM      Profile for Arturo Glez   Email Arturo Glez   Send New Private Message       Edit/Delete Post 
Hi friends I have received an elmo st 600 that does not works as a "present" someone have the service manual?

Or where to find it?

Thanks in advance, kind regards,Arturo.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted June 30, 2016 05:41 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Hi Arturo,

I have a set of schematics for the ST-600 that I'd be willing to share (-and why not? Someone shared them with me!), but I've never seen an ST-600 service manual.

You should ask some questions: we have a pretty decent record figuring these things out among ourselves here.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted July 01, 2016 02:44 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Oldtimer Cameras have a repair manual for the ST600, but not the ST600M. I expect most details are the same other than the slight differences.
http://www.oldtimercameras.com/manuals/camera-manual-elmo-st-600-3445.asp

--------------------
Maurice

 |  IP: Logged

Arturo Glez
Film Handler

Posts: 65
From: Barcelona, Spain
Registered: Feb 2015


 - posted July 02, 2016 07:54 PM      Profile for Arturo Glez   Email Arturo Glez   Send New Private Message       Edit/Delete Post 
Thanks friends,

Steve you have a message, regards,Arturo.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 02, 2016 08:20 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Hi Arturo,

You have an E-mail.

If you can measure your motor voltage, we can start to figure out what's going wrong.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Arturo Glez
Film Handler

Posts: 65
From: Barcelona, Spain
Registered: Feb 2015


 - posted July 04, 2016 02:52 PM      Profile for Arturo Glez   Email Arturo Glez   Send New Private Message       Edit/Delete Post 
Hi Steve, thanks for your message, but I did not receive your email, can you check it? I send you my email again through private message now.Regards, Arturo.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted July 04, 2016 03:26 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
It was stuck in "Drafts"!

You should have it now.

(Sorry about that!)

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2