8mm Forum: Bell and Howell 10ms manual or schematic

»	8mm Forum » 8mm Forum » Bell and Howell 10ms manual or schematic

UBBFriend: Email this page to someone!

Author

Topic: Bell and Howell 10ms manual or schematic

Brad Warble
Junior
Posts: 2
From: Florence, AL, USA
Registered: Jun 2018

posted June 20, 2018 07:20 AM

I am looking for a Bell and Howell 10MS operating manual, service manual and or schematic.
Bought a used one and the motor stopped running. I think it may be the function switch, so service manual would be very helpful.

Thanks for any advice on this unit.

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted June 20, 2018 01:59 PM

Welcome Brad! I don't recall ever seeing a service manual for this model. The instruction manual will not be much help in troubleshooting electrical problems, but your are welcome to have a copy. If you PM me your email address and indicate the projector model, I can send you a PDF of the 10MS Instruction Manual.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

Brad Warble
Junior
Posts: 2
From: Florence, AL, USA
Registered: Jun 2018

posted June 20, 2018 02:49 PM

Janice, thanks for the quick reply. I did find a operating manual and have also emailed B&H for a schematic. We’ll see how that works out.

Thanks again

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2