8mm Forum: WANTED : HUB ADAPTER EUMIG 712D

»	8mm Forum » 8mm equipment for sale/trade » WANTED : HUB ADAPTER EUMIG 712D

UBBFriend: Email this page to someone!

Author

Topic: WANTED : HUB ADAPTER EUMIG 712D

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted July 30, 2011 01:31 PM

I need a hub adapter for the pay-out hub that allows a S8 reel to go on R8 smaller hub. If you got one to part with I will buy it. If you have one NOT to part with I would love a picture of it to fabracate one from nylon.

| IP: Logged

Jim Schrader
Phenomenal Film Handler

Posts: 1628
From: Savage, MN, USA
Registered: Jun 2003

posted July 30, 2011 03:25 PM

hi pat is that a slot load 8mm projector?

--------------------
jim schrader
"Let's see “do I have that title already?"

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted July 30, 2011 04:34 PM

Yes. You insert the film right where you see it entering the projector and it self threads the rest of the way. I'm still working on it. I got it running well but no sound. A fun project for me to fill the hours. I really like this projector because it plays BOTH 8mm an S8mm magnetic sound. [Eek!]

UPDATE 8/04

Not a slotload.

[ August 04, 2011, 06:09 PM: Message edited by: Pasquale DAlessio ]

| IP: Logged

Zechariah Sporre
Jedi Master Film Handler

Posts: 557
From: Ladysmith, WI U.S.A.
Registered: Dec 2010

posted August 02, 2011 06:15 PM

Well I emailed you pictures (or atleast attempted to). I don't really want to sell mine. It's my only projector and I like it quite a bit. I hope the pictures help it was a little hard to get detailed pictures of. So are you going to have to buy another sound head for it? And if so where can you find them???

--------------------
There is a fine line between a hobby and a mental illness

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted August 02, 2011 08:00 PM

Zech

The pics are great. It will be able to make my own from a nylon bushing now. Not sure on the sound yet. Still working on it. I'm retired so no hurry.

Thanks again,

PatD

| IP: Logged

Kees Post
Junior
Posts: 7
From: Amsterdam, The Netherlands
Registered: Feb 2018

posted March 13, 2018 07:24 AM

hi, no need for 3d printing, u just can buy the adapter at:

https://winkel.van-eck.net/verbruiksartikelen/p-2a/SF-0276--verbruiksartikelen.html

:-)

--------------------
K

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2