8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm Forum   » Calling Claus Harding Lux pix wanted

 - UBBFriend: Email this page to someone!    
Author Topic: Calling Claus Harding Lux pix wanted
Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008


 - posted January 23, 2010 04:37 PM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
Claus I am assuming that your LUX is running on 110 volts, can you take a picture of the side of your motor where the power cord plugs in? There are the two pegs and one hole....My instructions say to plug the hole with the shorting plug, but I am not sure if I have that part so i want to see what it even is?

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged

Claus Harding
Phenomenal Film Handler

Posts: 1149
From: Washington DC
Registered: Oct 2006


 - posted January 23, 2010 07:22 PM      Profile for Claus Harding   Email Claus Harding   Send New Private Message       Edit/Delete Post 
Dino,

I wish I could help you, but my Lux is in storage in a bin at the moment, and I have no way of getting it out.
I hope someone else can chime in on this.

Claus.

--------------------
"Why are there shots of deserts in a scene that's supposed to take place in Belgium during the winter?" (Review of 'Battle of the Bulge'.)

 |  IP: Logged

Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008


 - posted January 24, 2010 01:37 AM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
Do you happen to remember what your plug in section looked like? and yes hopefully someone will post a pic as I am eager to get this thing up.

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2