Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
hello! i,m looking for a ser of rewind arms to hold 2200ft reels ,so if someone has a spare to sell please drop me a line
kidenest regards:
luis carameçp
A pair of rewinds for 35mm WILL allow 16mm reels on the 5/16 shafts. Simply put some cores on the shaft after the reel so the cores go out to the closing pin (spring loaded). There are many good ones out there so it should speed up your success!
Hello Luis
the rewinds are fixed to a board and include a 16mm CIR splicer, so probably not exactly what you are looking for. I have added some photos. I wouldn't know what to ask so would most likely list it on eBay.
Regards
Terry
Comment