16mm rewind arms

[Luis Caramelo]

hello! i,m looking for a ser of rewind arms to hold 2200ft reels ,so if someone has a spare to sell please drop me a line
kidenest regards:
luis carameçp

[Chip Gelmini]

Just to let you know

A pair of rewinds for 35mm WILL allow 16mm reels on the 5/16 shafts. Simply put some cores on the shaft after the reel so the cores go out to the closing pin (spring loaded). There are many good ones out there so it should speed up your success!

[Chip Gelmini]

The 35mm shafts will also accept brass adapters for super 8, too.

[Chip Gelmini]

https://www.ebay.com/itm/254352091402

reasonable price WILL DO WHAT YOU NEED

[Luis Caramelo]

thaks for the tip Chip i,ll see what i can do,

many thanks,

regards;
luis caramelo

[Terry Sills]

This is where members location is so important. I have a spare 16mm rewind set, but I'm guessing that you are in the USA Luis. Correct?

[Luis Caramelo]

hello! Terry thanks for the reply.i.m living in portugal (madeira island) so tell me details of your rewind set.i.m interested.

thanks:
luis caramelo

[Terry Sills]

Hello Luis
the rewinds are fixed to a board and include a 16mm CIR splicer, so probably not exactly what you are looking for. I have added some photos. I wouldn't know what to ask so would most likely list it on eBay.
Regards
Terry

[Luis Caramelo]

thanks tTerry for your care it all depends how mutch do you ask,?

but i.ll pass the board only the arms and the splicer,

regards:
luis caramelo