Announcement

Collapse
No announcement yet.

Eiki NT-2 Amp needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Eiki NT-2 Amp needed

    I need a new amp (I think) for this unit. The exciter is not working and I don't think the amp is on at all. The fuses are good. Not sure who could reapir this unit, so looking for someone with a working spare for sale. Thanks.

  • #2
    Greetings Mike
    Did you check for power to the amp ?
    Is the exciter lamp light up ?
    Have you replaced the lamp? it takes the BRK
    Is the projector running ?

    Comment


    • #3
      Yes everything works except the amp/exciter.

      Comment


      • #4
        Greetings Mike
        Why do you thing its the amp besides the lamp not lite up ?
        What procedures did you check ?

        Comment


        • #5
          Well, when I plug in the power I hear a low ground hum in the speaker, but usually if you crank the volume the hum will increase but there's nothing. The bulb is good, I check voltage at the exciter supply and there's nothing. Not sure how much I can do personally on this to trouble shoot every possibility. I'm just thinking if I replace the amp, which pretty much will swap out with two screws, I'll be golden.

          Comment


          • #6
            Do you work on these units? Repair?

            Comment


            • #7
              Greetings Mike
              Yes I do Service and repair On Eiki, Elmo, And Bell & Howells
              Please visit my web site at

              http://rcsclassic16mm.com/index.html

              Click on Service

              My email is patchetts@comcast.net

              Thank you
              RC Patchett

              Comment

              Working...
              X