Tweet
I also have an Ampro Stylist, which has been the bane of my life, the amplifier has very low volume, almost indistinct. Upon stripping it , I find the circuit board is so tightly packed that its impossible to even begin checking caps. Whoever designed this board obviously new er considered anyone actually being able to get in it! The valves are all okay as far as I can see, (I have a spare projector, same problem, which I use for spares. I am no expert on electronics, so am wary of fiddling with what I don't understand, but otherwise this projector is heading for the skip, which is a shame. Anyone any advice on the amp please?
- Welcome to the new 8mm Forum! The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate. To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above. Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here. Once the registration has been approved, you will be able to login via the link in the upper right corner of this page. Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face. Thank you!
Comment