Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Is there anyone in the UK or in mainland Europe (preferred) who can replace the worm gear of a Bell & Howell TQ3?
It's important that the projector runs fine. Sound or fps calibration or not critical.
Floris
At the moment I cannot advise on 16mm Bell & Howell projector repairs in the UK or Europe.
However, there is a gentleman in the United States who still advertises repairs to 16mm projectors, including Bell & Howell. No doubt to include replacement worms.
r Service (rcsclassic16mm.com)
Well, sending a projector from Belgium to the US for worm gear replacement is not really feasible.
I would give VanEck (https://van-eck.net/reparatie-overzi...e-projectoren/) a call or the people running https://www.filmwebshop.nl/.
They will either be able to help you, or put you in touch with someone who can. These are in the Netherlands, but VanEck is in Tilburg, which is a stone's throw away from Antwerp.
Let us know how you get on!
- Rob
Last edited by Rob Koeling; July 13, 2022, 06:38 AM.
Tweet
Comment