Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Have you tried the German film site: https://www.filmvorfuehrer.de ? Look in the 'Schmalfilm' forum, create an account, and ask your questions there. However, look for a member of the forum there named GIZMO. He has a projector like yours and would possibly be able to help you. He helped me with my P6 Studio a few years ago. Sadly there are no parts floating around anymore, so be gentle with it. lol.
Remember, you need to lubricate the machine, especially the 'gripper' with the proper Fett before you use it a lot.
You do have a manual for it, right? A real challenge to dismantle.
There is a P6 for sale on USA eBay right now. But, you will still have problems finding the toothed belts (another story). I've given up on finding a toothed belt for the feed arm on the SEPMAG side. No one makes them anymore. So, if I run the projector in reverse, I have to hand wind the film up on the reel. 🙁
I have not yet created an account on this website, but I have read all the topics I found concerning Gizmo's and other members adventures with their bauer double band projectors. I will get in touch with them !
Finally beside the belt, I found the gears parts from Van Eck, so at least I will be able to replace the gears from the sepmag, I already replaced all the drive belts and gears, that was not easy but I finally know this projector much more since. I can almost do it with eyes closed 😁 The 4 pin burned connector will be replaced with a molex, or directly soldered to the plate.
Lubrication will be done for sure, I need to find a small quantity of NB5051 lube for the shuttle felt lubrication system, I guess that's what you call "gripper" ? The lube is very expensive nowadays, especially on wittner website.
I already have all the service manuals from Olaf Kino website hopefully
I thought about using a 63 or 64 toothed t5 belt instead of the 62 original one, and add a tensioner. I have a spare 25fps belt tensioner from my other P6 studio that might do the job. It seems to be the only solution apart from hand winding in reverse. I still have an other original belt that is still in OK condition but will not last long.
This P6 for sale is quite expensive considering the high hours it has, mine is only 270h, this one is 1k ! I think people don't realize the amount of time and knowledge to make these machines run again.
I consider more and more servicing my Eiki 16mm sound follower and adding a motor drive with optical synchronization for stand alone use or with a projector, parts are way easier to find and simpler to service. But I will not give up with this Bauer.
Comment