Tweet
Hi - Newbie here. Helping my dad with some digitizing of old vids. But we need to change a bulb in a Revere 777. Not sure how the bulb comes out. Does anyone have an old Revere 777 manual? Thanks!
-
-
Chris
The lamp on a Revere 777 is called a pre-focus lamp because it has different sized flanges which prohibit the incorrect fitting in its holder.
To remove, you press it down whilst turning it 90 degrees anti-clockwise, then lift out upwards.
To install a new lamp you need to look at the different flanges and compare the slots in the lamp holder. Place in position, press down and turn clockwise.
Good luck.
https://www.porterelectronics.com/re...lamp-bulb-ddb/
Maurice -
Comment