Announcement

Collapse
No announcement yet.

Revere 777 Manual

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Revere 777 Manual

    Hi - Newbie here. Helping my dad with some digitizing of old vids. But we need to change a bulb in a Revere 777. Not sure how the bulb comes out. Does anyone have an old Revere 777 manual? Thanks!

  • #2
    Chris
    The lamp on a Revere 777 is called a pre-focus lamp because it has different sized flanges which prohibit the incorrect fitting in its holder.
    To remove, you press it down whilst turning it 90 degrees anti-clockwise, then lift out upwards.
    To install a new lamp you need to look at the different flanges and compare the slots in the lamp holder. Place in position, press down and turn clockwise.
    Good luck.

    https://www.porterelectronics.com/re...lamp-bulb-ddb/


    Maurice

    Comment


    • #3
      Originally posted by Maurice Leakey View Post
      Chris
      The lamp on a Revere 777 is called a pre-focus lamp because it has different sized flanges which prohibit the incorrect fitting in its holder.
      To remove, you press it down whilst turning it 90 degrees anti-clockwise, then lift out upwards.
      To install a new lamp you need to look at the different flanges and compare the slots in the lamp holder. Place in position, press down and turn clockwise.
      Good luck.

      https://www.porterelectronics.com/re...lamp-bulb-ddb/


      Maurice
      Maurice - Thank you a ton!!!!!!!!!!!!

      Comment

      Working...
      X