I have set up a small cinema with the picture projecting onto a wall. Does anyone have experience of which is the best paint to use for the screen on the wall. I am going to use white paint but wondered if some of the expensive alternative paints make that much difference?
Announcement
Collapse
No announcement yet.
What is best paint for a screen on a wall
Collapse
X
-
Tim
You don't say where you live.
In the UK "Dulux Pure Brilliant White Matt Emulsion" is an ideal paint for movie projection on walls.
Dulux Pure Brilliant White Matt Emulsion Paint 5L | Wilko
-
Unless your wall is perfectly smooth you will have to use a flat white paint. Any paint that is satin or gloss will highlight every rough feature of the wall as a "hot spot" and this will look terrible. If your wall is not totally smooth flat white paint will work fine.
In the USA I have found Sherwin Williams ULTRA WHITE flat paint to be as good as a matt white screen with a gain of 1.0
Steve Osbourne at The Reel Image sells special screen wall paint. I have not tried Steve's paint and I do not know if it has a gain greater than 1.0, but I suspect it does in order to increase screen brightness over a matt white surface. But if Steve is selling it then it is probably an excellent paint. Just be aware though that any paint with a gain greater than 1.0 absolutely requires a totally smooth wall surface, otherwise you will see hot spots all over the place.
Comment
-
First I would recommend buying a roll of photographic background paper. It is like a 2 meter wide roll of white wall paper. This is great to cover your screening wall with.
Then proper self adhesive black felt screen masking tape is an absolute must for the screen boarders & tabs.
Alternatively Iinstead of white paint there are grey screen paints.
I have "Grey level 2 screen paint" painted on my screen as this really improved the black levels & overall picture quality when calibrating my video projector.
Not so good with standard halogen super 8 projectors, but with brighter super 8 machines, (especially the HID150) & standard lamp 16mm 250w all look good. Certain prints benifit very well indeed. The grey screen helps to kill the red in red prints & faded prints have more contrast than on a white screen. Of course as my cineroom is in the basement there is total blackout from any light & with a black ceiling, dark walls & a short throw, this makes the use of a grey screen possible.
Comment
-
I also use a vintage grey projector screen from the 60's. A Daylight Flyer! I have to say the colors, contrast, and sharpness of my color and black and white films seem to be improved. When I projected onto a white screen the details seemed to be lost. I project with a Honeywell Elmo FP8-C using a 150 watt bulb and fitted with a Bolex "hifi" prime 15mm 1.3 projector lens.
Comment
-
Philip
Have a look at the top section on the attached link. It is suggested you contact "The Reel Image" before you buy to ascertain correct pricing and availability.
The Reel Image Web Showroom of Quality Cine Products!... - The Reel Image (jimdofree.com)
Comment
Comment