My newest and favorite projector just f’ed me. Elmo Traveler Series. Loved it! Motor still runs. Suddenly no forward or reverse movement. Guessing a belt broke. Not in the mood to open it up and diagnose right now. F**k me.
Announcement
Collapse
No announcement yet.
So mad
Collapse
X
-
I'd say a belt is an excellent guess: sounds like the motor belt, as a matter of fact.
It's actually a pretty easy fix!
Super 8,ELMO ST-100,St-100E Projector Belts, 2 Belt Set, WORLD WIDE SHIPPING
Comment
-
Originally posted by Steve Klare View PostI'd say a belt is an excellent guess: sounds like the motor belt, as a matter of fact.
It's actually a pretty easy fix!
Super 8,ELMO ST-100,St-100E Projector Belts, 2 Belt Set, WORLD WIDE SHIPPING
The inside of this projector is so clean. The grease looks a bit dirty, but it's still slippery and hasn't dried out.
Last edited by Dave Bickford; December 13, 2022, 02:51 PM.
Comment
-
Things like this are kind of like catching a cold: just a reality of life that comes sooner or later and you just deal with it knowing it could be something much worse.
I can vouch for this seller: I hope he stays at it for a very long time!
It's a nice looking machine: pretty low mileage which is a big plus this many decades down the road. It should serve you quite well!
I'm a big fan of the simpler Elmos like this. No: they can't fill up a theatrical sized screen, but the sound is generally pretty good and if you can get one or put one in decent order they can put on a nice show on a home-sized screen. They don't have Ferrari-Like capabilities, but you don't need a Ferrari to get back and forth to work every day.
- Likes 1
Comment
-
Dave,
if you find the picture doesn't zoom as large as you would like, you should try to find the regular 12mm-25mm zoom this machine came with. They should be very common.
What you have there is commonly called an "auditorium lens": specifically for cases where a long throw would cause the picture to spill off the screen.
I use these because I show 'scope films with a 25 Foot throw and without the narrowed beam I get spillage on an 8 foot wide screen.
Comment
-
Originally posted by Steve Klare View PostDave,
if you find the picture doesn't zoom as large as you would like, you should try to find the regular 12mm-25mm zoom this machine came with. They should be very common.
What you have there is commonly called an "auditorium lens": specifically for cases where a long throw would cause the picture to spill off the screen.
I use these because I show 'scope films with a 25 Foot throw and without the narrowed beam I get spillage on an 8 foot wide screen.
Comment
-
You can tell which one you have by the markings on the lens. I would expect an ST-100 to be built with something like "f: 1.3 F: 12-25 mm". This is a good, general purpose lens for home viewing, but there were other lenses that were optional and could be fitted in place of the standard lens. Some of the higher performers among these are quite valuable these days: they will often sell for more than entire used projectors with the stock lenses.
If you are seeing something like "f: 1.? F: 25-50 mm", that's an auditorium lens.
If I were to use mine without the external anamorphic lens (for regular projection) I'd probably need to back the machine up something like 30 feet from the screen to fill up a 4.5 foot tall screen top to bottom: out in the back yard through a window!
Comment
-
Originally posted by Chip Gelmini View PostThat weird looking speaker connection is called 2 pin din Contact Steve Osborne to get the plugs that goes from strange to normal RCA female and you'll be all set. I did try and get some recently and he was out of stock.
Comment
-
That kind of thing is the mark of a machine that hasn't been used a huge amount. I have a new old stock ST-800 and it came with that too. It and yours are the only ones I know of that still have this.
When you took the back cover off, were there lock washers under the screws? Once again, the only Elmo I've ever seen that still has these is mine.
To be honest, they don't do a whole lot and people who toss them don't suffer for putting back the screws without them. This is not a combat aircraft or a piece of construction equipment that will vibrate the screws loose! (I've vowed to keep these in place when I take it apart just to preserve it as built!)
Comment
-
Well, the fact that you had functioning belts may explain that: there's just no way one of these could still have original belts in anything close to belt-shape!My long belt looked like this! (...or should that be "these"?!)
.
I had the original lamp: it literally fell apart after about 2 minutes of use!
Comment
-
Originally posted by Steve Klare View PostYou can tell which one you have by the markings on the lens. I would expect an ST-100 to be built with something like "f: 1.3 F: 12-25 mm". This is a good, general purpose lens for home viewing, but there were other lenses that were optional and could be fitted in place of the standard lens. Some of the higher performers among these are quite valuable these days: they will often sell for more than entire used projectors with the stock lenses.
Comment
Comment