Welcome to the new 8mm Forum!
The forum you are looking at is entirely new software. Because there was no good way to import all of the old archived data from the last 20 years on the old software, everyone will need to register for a new account to participate.
To access the original forums from 2003-2019 which are now a "read only" status, click on the "FORUM ARCHIVE" link above.
Please remember registering with your first and last REAL name is mandatory. This forum is for professionals and fake names are not permitted. To get to the registration page click here.
Once the registration has been approved, you will be able to login via the link in the upper right corner of this page.
Also, please remember while it is highly encouraged to upload an avatar image to your profile, is not a requirement. If you choose to upload an avatar image, please remember that it IS a requirement that the image must be a clear photo of your face.
Thank you!
Of course we all know of the color fade problem associated with many color print stocks, but are there ageing issues associated with black and white prints? I ask this because I have noticed that some of my prints are trending to a sepia like look, even though they are not printed on color stock. Its like the white highlights are no longer white but now yellowish or brownish. Is the acetate film base degrading or what?
Anybody else seen this?
I read that black and white stock could last at least 300 years and colour ones (probably Kodachrome quality) could last at least 50 years. That must be in ideal storage conditions, so for amateurs collectons, don't expect too much to be able to watch your black and white films when you're 250 or 300 .
Well, Kodachrome is long past the 50 years of existence mark and still looking brilliant, better than most other home movie stocks. Interesting about the black and white films, though. I had only heard and seen the brownish or copper like "beads" on decomposing black and white stock.
My B/W prints from Blackhawk still look good, but there are other prints which are yellowing as you have noted.
But there are other deteriote of B/W prints which I found i.e small black spots (kind like pimples), picture gone from the cells and of course, vinegar syndrome.
As others have said if thefilms were run through a part exhaused fixed bath the slight residual silver halide might turn a sepia colour, mostly seen in light greys and white areas.
The only deterioration of black and white film I have ever had was a short film I made on 9.5 film in the late 70s and this was due to poor processing. Never had any problems with printed films except with a few printed during the war which were printed on newsreel stock which became r a ther brittle. I am talking about 9.5 Pathescope prints. Even the little notched films from the 1920s are fine. I think so much depends on how they are stored and purch asking used prints can be a bit of a lottery. Ken Finch😏
Comment