Janice Glesser- I finally have my system setup for HD captures. I installed an Elgato 4k60 Pro capture card and swapped out projector lens for Sunray 16mm. My dedicated capture drive is an external Sandisk 500g SSD. My camcorder is Sony HDR-CX760V but only has 10x zoom so I'm on the fence about getting another camera. I have done some test captures and have experimented with post processing using Power Director, i.e. invert, crop, and speed change. At this point the learning curve is steep.
On the few test captures I've done I noticed a few frames would have the vertical flashing showing up every so often. As I remember this seem to be a disc/sync timing issue but it almost seems like the camera is not processing the interlacing correctly. Any thoughts on this?
Could you reveal some more of your techniques? Does reformatting the SSD with a larger cluster size help? Do you capture at 60 or 24 fps? What shutter speed have you found works best? My camera allows for progressive or interlaced setting, which would recommend? Anything other suggestions would be greatly appreciated. Thanks for your all your help thus far.
On the few test captures I've done I noticed a few frames would have the vertical flashing showing up every so often. As I remember this seem to be a disc/sync timing issue but it almost seems like the camera is not processing the interlacing correctly. Any thoughts on this?
Could you reveal some more of your techniques? Does reformatting the SSD with a larger cluster size help? Do you capture at 60 or 24 fps? What shutter speed have you found works best? My camera allows for progressive or interlaced setting, which would recommend? Anything other suggestions would be greatly appreciated. Thanks for your all your help thus far.
Comment