8mm Forum: Keystone 109 oiling issues

»	8mm Forum » 8mm Forum » Keystone 109 oiling issues

UBBFriend: Email this page to someone!

Author

Topic: Keystone 109 oiling issues

Seth Weiner
Junior
Posts: 2
From: Canton, NY, USA
Registered: Mar 2017

posted March 11, 2017 04:32 PM

Hey guys, this is my first post lol

I have a Keystone 109, and it looks like one of the oiling holes is clogged; any thoughts on cleaning it out? Can I use a paper clip or something?

--------------------
Seth Weiner, MA DipSW

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted March 11, 2017 06:59 PM

Are you sure the oil hole is blocked? It just may be already full. If it is indeed blocked I would first try something like a thin pipe cleaner or even a thin piece of flexible wire. If the obstruction is not too solid or too deep you might try the little brushes used to clean your teeth [Smile]

Just be careful... you don't want to get anything else stuck in the channel.

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2