8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » General Yak   » 8mm projectors

 - UBBFriend: Email this page to someone!    
Author Topic: 8mm projectors
Ousama Al Balaa
Junior
Posts: 4
From: Montreal, Canada
Registered: Nov 2015


 - posted November 30, 2015 10:26 PM      Profile for Ousama Al Balaa   Author's Homepage   Email Ousama Al Balaa   Send New Private Message       Edit/Delete Post 
I am in Canada. I am converting 8mm movies to digital formats. I have not been successful as I am getting flickers and the bulb on the Bell & Howell projector burnt out. Replacement DJL bulbs are very expensive and last only 15 hours. I have read a lot on line but unfortunately no concrete answers are offered.
Any suggestions for help?

--------------------
Ousama

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted November 30, 2015 11:25 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Ousama...take a look at this video by George Tveden. He shows how to replace the DJL lamp with a halogen lamp.

https://www.youtube.com/watch?v=kUfryuOhJ-A

I have done this as he has described and it's very easy. Here is how my conversion turned out.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=009488#000010

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2