posted July 09, 2009 08:51 AM
I recently bought an Elmo 16-cl and am now in the process of cleaning it. For some reason (beyond my limited comprehension) it is missing the projection lens cover. If anyone has one, let me know and I would be more than happy to buy it from you.
Posts: 424
From: Flint Mi 48506
Registered: Dec 2007
posted July 09, 2009 01:22 PM
Greetings That cover is no longer available from Elmo Int I might be able to order that cover from Elmo Japan if it is available from them Might be a month or 2 if they have one . (slow boat from China (Japan) I do not know the cost of the cover. My be a little pricey. I can try when i place my next months order. That part number is 4p10322 which covers the lamp Or do you need the one with the hole in it for the focus knob I have 2 of them in stock At a cost of $15.00 each plus mailing.
-------------------- RC’s Classic Collection 16 mm Parts & Service Elmo, Eiki, Bell & Howell + http://www.rcsclassic16mm.com/
posted July 09, 2009 03:07 PM
Hi Richard I need the one with the hole in it for the focus knob. Let me know the full amount and how to pay you. Thanks for the quick reply. I cleaned the machine up and ran a reel thru it. Runs like a charm and the sound was surprisingly good!
Posts: 424
From: Flint Mi 48506
Registered: Dec 2007
posted July 10, 2009 10:45 AM
Greetings Pay pal is fine use my email address patchetts@ameritech.net Or send check or money order (No western Union) For my mailing address please e mail me
1 projection lens cover $15.00 Shipping and handling $8.00 Total of $23.00 Will ship on same day as payment is made Thank you RC Patchett
-------------------- RC’s Classic Collection 16 mm Parts & Service Elmo, Eiki, Bell & Howell + http://www.rcsclassic16mm.com/
posted July 10, 2009 11:28 AM
Richard, Check your PayPal account, the deposit should be there. Thanks for getting with me and solving my search. It's much appreciated.
posted July 11, 2009 12:11 PM
Apart from the glorious ElmoScope II, I have never seen any of the Elmo lenses with their caps. Never. I guess this is a very rare breed.
Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008
posted July 11, 2009 12:37 PM
Jean-Marc, I think Michael is talking about a COVER that fits over the lens assembly with the Focus knob poking through it, not a CAP to fit over the front glass of the lens?
Martin
[ July 11, 2009, 01:39 PM: Message edited by: Martin Jones ]
-------------------- Retired TV Service Engineer Ongoing interest in Telecine....
posted July 13, 2009 08:10 AM
Martin, you're correct. The cover is for the side of the lens and reduces the light coming out the side of the machine and also helps to keep the dust from getting into the all the little parts. It doesn't make sense to call this a lens cover because the lens is not covered as with a traditional lens cover............ but the owners manual labels it as a lens cover. Why? The answer could be anybody's guess.
Posts: 424
From: Flint Mi 48506
Registered: Dec 2007
posted July 14, 2009 09:04 AM
Greetings You should have received the lens cover already Last check was Processed through Sort Facility, July 13, 2009, 6:54 am, CHAMPAIGN, IL 61821
Thank you for your order RC
-------------------- RC’s Classic Collection 16 mm Parts & Service Elmo, Eiki, Bell & Howell + http://www.rcsclassic16mm.com/
posted July 29, 2009 05:38 PM
I can tell you guys now that if you want Elmo 16mm Machine parts Richard is your man. If he cant get them then nobody can. Service is second to none.
Kev.
-------------------- GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.
posted July 31, 2009 08:31 PM
Hi Richard thanks, sorry I missed yout post.
Appreciate the kind help, can`t see any part numbers on a quick look, could probably do with all of them if not too serious. The main drive is OK with an O ring as using at the moment, but the main large flat one side toothed job, and the flywheel drive one would be handy and any others you can find out about please.
posted August 01, 2009 06:26 AM
Richard, Your welcome. As I said earlier your service has been excellent and dealing direct with you has in some respects been easier than dealing with some of the UK dealers. Incidentally I have not found anyone in the UK that deals direct with Elmo like you do.
Once again thanks for all you have done for me in the past especially those elusive screws for the CL which I really didnt think I would get.
Kev.
-------------------- GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.
Posts: 424
From: Flint Mi 48506
Registered: Dec 2007
posted August 04, 2009 11:46 AM
Greetings Mark Update still checking Elmo USA got back to me today No belts in stock For the 16aa Still checking my other sources. all 10 of them Will let you know as i find out Sure theirs no part number on that belt you need. I lent my master service manual out about 2 weeks ago. He forgot to send it back before he and his better half went on vacation. So im a little lost for part numbers for said unit.
RC
-------------------- RC’s Classic Collection 16 mm Parts & Service Elmo, Eiki, Bell & Howell + http://www.rcsclassic16mm.com/
posted August 04, 2009 12:46 PM
Hi Richard thanks for all of the kind efforts, I`ll nip the back of again tomorrow and go in with a torch just to be sure. Best Mark.
Posts: 424
From: Flint Mi 48506
Registered: Dec 2007
posted August 07, 2009 09:35 AM
Greetings I have one source left. But that unit was a very early model late 60’s early 70’s so much has changed parts wise from that model. Still on the look out RC
-------------------- RC’s Classic Collection 16 mm Parts & Service Elmo, Eiki, Bell & Howell + http://www.rcsclassic16mm.com/
posted August 07, 2009 07:18 PM
Hi Richard, its very good and kind of you to go to all of these efforts. I`m going to nip back into the back of the machine tomorrow. The actual film path etc is the same as the 16A so maybe the more needed belts are the same. Anyway I`ll be in touch tomorrow and thanks again. Best Mark.