8mm Forum: anyone tried this?

»	8mm Forum » 8mm Forum » anyone tried this?

UBBFriend: Email this page to someone!

Author

Topic: anyone tried this?

Richard Clark
Junior
Posts: 27
From: london
Registered: Jun 2003

posted June 07, 2004 04:39 AM

I have an ELMO ST 180M and when my brother looked at K40 being projected he said the colours of the whites are a orangey colour.
So then i started to look at the projected whites and with no film run through the elmo the white is not really white and it seemed better by placing an 82A filter in the lens?
Anyone tried to correct the whites as i have never noticed it before but now i can see what he means all films shot have a tendency to have this browning of the white colours.
Any ideas to make it more life like?

| IP: Logged

John Clancy
Phenomenal Film Handler

Posts: 1954
From: Cornwall
Registered: Jun 2003

posted June 07, 2004 06:15 AM

I haven't come across that at all and bearing in mind I've shot a lot of Kodachrome skiing I would have thought I'd have noticed orange snow. I'll have to check.

--------------------
British Film Collectors Convention home page www.bfcc.biz. The site is for the whole of the film collecting hobby and not just the BFCC.

| IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003

posted June 07, 2004 06:24 AM

I think the problem may be the lens. I had an old ST1200 with the f1.3 15-25mm lens which I remember definately put a slight orange cast on the projected image. When I replaced the lens with the better quality f1.2 and f1.0 lenses the picture was much whiter. The f1.3 lens may have different coatings ,or maybe its the use of plastic optics in the f1.3 versus glass in the f1.2 and f1.0. Either way, I thought the f1.3 was a poor quality lens.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

| IP: Logged

Chris Quinn
Master Film Handler

Posts: 372
From: England, Bedfordshire.
Registered: Nov 2003

posted June 07, 2004 11:15 AM

I have to agree with Paul, i would definitely check the lens out. I would also say that by using filters you would be dropping the level of light output on to the screen.
If you can, try another lens or see if you get similar results from another projector, i must say i have never noticed this.

Chris.

--------------------
The other half thinks i'm up to something. Shes right of course.

| IP: Logged

Richard Clark
Junior
Posts: 27
From: london
Registered: Jun 2003

posted June 07, 2004 02:26 PM

Hi,
Firstly thanks for all the replies and you may have the problem i suppose it could be the lens i didnt know it was plastic optics in the f1.3.
I can see that i will have to look at the lens more closely.
One more question that you may be able to answer if you were to project a blank image(no film) on to a screen with a 12v100w elmo projector should the white projected image be as white as you would get from say a computer monitor(white screen view)
What im trying to see is if it is the lamp colour and its just how thing are as i would say the projection at the moment is just like looking through an 81A warming filter its too much to say its orange but on the other hand its not white,and im not sure its just how the 100w type bulbs are?
Best Regards
Richard..

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2