Barry Webb
Film Handler
Posts: 79
From: Cornwall, England.UK
Registered: Jan 2010
|
posted February 20, 2013 02:00 PM
I have a sankyo 700 that has no power to the motor the motor tests ok so does the power from the transformer the lamp and amp work fine the 32volt power to the circuit board for the motor is also good. I have found a broken track on the board and put a bridge across but it just blows the motor circuit fuse now.
So if anyone has a circuit diagram for this machine it would be very helpful.
Barry.
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
