8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig Mark 610D lamp socket...

- UBBFriend: Email this page to someone!    
Author Topic: Eumig Mark 610D lamp socket...
Zach Von Joo
Film Handler

Posts: 33
From: San Francisco
Registered: Sep 2010

- posted January 23, 2013 02:34 PM      Profile for Zach Von Joo   Email Zach Von Joo   Send New Private Message       Edit/Delete Post 
Who sells these? I had the same problem a while back with a different projector, now this one.

The 2-pin plastic & ceramic bulb socket is crumbling apart.

Thank you!

 |  IP: Logged
Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

- posted January 23, 2013 03:04 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
Zach

Try www.allelectronics.com

Good luck

PatD

 |  IP: Logged
Bill Rodgers
Film Handler

Posts: 80
From: United Kingdom
Registered: Jan 2013

- posted January 23, 2013 06:23 PM      Profile for Bill Rodgers   Author's Homepage   Email Bill Rodgers   Send New Private Message       Edit/Delete Post 
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330720355799

My Bolex 18-3 Duo had the same problem and I've been using one of these for the past six months with no problems. [Smile]

 |  IP: Logged
Zach Von Joo
Film Handler

Posts: 33
From: San Francisco
Registered: Sep 2010

- posted January 24, 2013 01:41 AM      Profile for Zach Von Joo   Email Zach Von Joo   Send New Private Message       Edit/Delete Post 
Thanks guys! Bill, that one looks familiar.

I also found this one that looks as if it may work: http://www.bulbamerica.com/osram-sylvania-tp-57-gu-gx-gz-4-g-gx-gy-gz-6-35-lamp-holder.html

 |  IP: Logged
Bill Rodgers
Film Handler

Posts: 80
From: United Kingdom
Registered: Jan 2013

- posted January 24, 2013 05:35 AM      Profile for Bill Rodgers   Author's Homepage   Email Bill Rodgers   Send New Private Message       Edit/Delete Post 
You should just need an MR16 lamp holder, suitable for 100w bulbs.

The Bolex 18-3 Duo was manufactured by Eumig and is virtually identical to your 610D. [Smile]

 |  IP: Logged
Ken Finch
Jedi Master Film Handler

Posts: 543
From: Herne Bay, Kent. U.K.
Registered: Oct 2011

- posted January 24, 2013 12:39 PM      Profile for Ken Finch   Email Ken Finch   Send New Private Message       Edit/Delete Post 
These sockets are plentifull in the U.K. from most electrical and D.I.Y stores like B&Q and Maplins. Ken Finch. [Smile]

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2