8mm Forum: Belt Installation on ELMO 600

»	8mm Forum » 8mm Forum » Belt Installation on ELMO 600

UBBFriend: Email this page to someone!

Author

Topic: Belt Installation on ELMO 600

Len Feiner
Junior
Posts: 1
From: Ridgewood, NJ, USA
Registered: Sep 2015

posted September 12, 2015 11:32 AM

I have an ELMO 600 projector and have new belts in hand. The longer belt was easy to install but I can not get the shorter belt on. There is not enough clearance to get the shorter belt around the larger pulley. What am I missing?
Thanks for helping a newbie!
Len

| IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011

posted September 12, 2015 03:09 PM

Hi Len...Welcome to the Forum. I have the ST800. If the ST600 is the same...check out this thread with a photo where the belt goes on. If your machine is different perhaps someone else on the forum can advise.

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=010059

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2