8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Kodak Instamatic M67 Belt Installation

 - UBBFriend: Email this page to someone!    
Author Topic: Kodak Instamatic M67 Belt Installation
Alexa Alana
Film Handler

Posts: 15
From: San Diego, CA, USA
Registered: Mar 2016


 - posted April 05, 2016 07:37 PM      Profile for Alexa Alana   Email Alexa Alana   Send New Private Message       Edit/Delete Post 
Hi all,
I picked up the Kodak Instamatic M67 for rather cheap and I have used it a couple of times, however the machine only had one large belt that it was running with. This belt broke since it was installed incorrectly, and after doing some research I found that the machine actually runs with five belts. Does anyone have a service manual/diagram, or anything that may show how to install all of these belts? I'm at a complete loss since I had only looked at it when it had the one large belt in place.

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted April 05, 2016 07:46 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
Hi Alexa

Maybe a forum member has one that can take the back off and photo it so you can see the belt configuration?

PatD [Big Grin]

 |  IP: Logged

Alexa Alana
Film Handler

Posts: 15
From: San Diego, CA, USA
Registered: Mar 2016


 - posted April 05, 2016 08:27 PM      Profile for Alexa Alana   Email Alexa Alana   Send New Private Message       Edit/Delete Post 
Ah, that's definitely an idea, as well! Though, I'm not sure if many have the projector since it seems to be more on the low-end side.

 |  IP: Logged

Janice Glesser
Film Goddess

Posts: 3468
From: Sunnyvale, CA USA
Registered: Sep 2011


 - posted April 05, 2016 10:17 PM      Profile for Janice Glesser     Send New Private Message       Edit/Delete Post 
Alexa...Here is a service manual listed on Ebay....but my guess is that it cost more than you paid for the projector.

http://www.ebay.com/itm/Kodak-8MM-movie-projector-service-and-set-up-manuals-M67-M67-K-/252264765796

I'd save your money and if you need a dual projector....spend the money on something in a little better condition [Smile]

--------------------
Janice

"I'm having a very good day!"
Richard Dreyfuss - Let It Ride (1989).

 |  IP: Logged

Thijs de Kort
Film Handler

Posts: 51
From: Tilburg, Netherlands
Registered: Jun 2015


 - posted April 06, 2016 02:08 AM      Profile for Thijs de Kort   Email Thijs de Kort   Send New Private Message       Edit/Delete Post 
I have edited a picture from the van-eck website so you can see where (i think) the 5 belts are supposed to be placed.

 -

Numbers + which belt is supposed to be there:
1: Front arm belt (inside the cap
2: Belt between arms
3: back arm belt (inside the cap)
4: big engine belt
5: small engine belt

Hope this helps you out.

 |  IP: Logged

Alexa Alana
Film Handler

Posts: 15
From: San Diego, CA, USA
Registered: Mar 2016


 - posted April 06, 2016 07:11 PM      Profile for Alexa Alana   Email Alexa Alana   Send New Private Message       Edit/Delete Post 
Thank you, Janice. That is definitely more than I paid for the projector itself, haha. I actually have another projector (the Keystone 2500), but the lens is foggy due to it coming from someone that was a smoker. This causes the picture to not be as colorful/sharp (working on replacing the lens if I can find another). This little kodak projector actually produces a stellar picture! [Smile]

And, Thijs, thank you very much. Unfortunately, that is a completely different model. The belts are different in size/shape and the mechanisms inside are like night and day compared to mine.

Thank you both. The machine is working with just one of the five belts. It rubs a bit on the metal areas inside, however the belt could probably last years as it is.

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted April 06, 2016 07:52 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
Just found this on ebay. A little less expensive.

http://www.ebay.com/itm/Kodak-M67-M67-K-M68-M68A-M68K-M77-Movie-Projector-Repair-Manual-/371238386596?hash=item566f883ba4:g:f6sAAMXQLoZR2eml

PatD

 |  IP: Logged

Alexa Alana
Film Handler

Posts: 15
From: San Diego, CA, USA
Registered: Mar 2016


 - posted April 07, 2016 12:34 AM      Profile for Alexa Alana   Email Alexa Alana   Send New Private Message       Edit/Delete Post 
Thank you, Pat! That is cheaper, but it just does not seem worth it since I have already invested $25 for the projector plus around $15 for the belts. As long as the projector works, I am pleased with it. It is actually working very well with just the one belt! [Smile]

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2