Expert Film Handler
From: Denham, Buckinghamshire, UK
Registered: Aug 2014
posted March 11, 2017 07:59 AM
Hi, i recently picked up a nice clean eumig 807D but it needs a new standard 8 top sprocket as this one is cracked and just spins freely on the shaft, its the later type which is perminantly attatched to the shaft and is held on by a tiny hex head grub screw in the side,it needs to match the one in the pictures as i think there are a few different variations.Also i need a super 8 sprocket which pushes onto it as this one is also broken, again it needs to match the one in the pictures.Any help would be much appreciated, just let me know the cost.I'm based in the uk.First here's the pictures of the perminantly attached standard 8 sprocket.
And here's pictures of the super 8 sprocket.One of the plastic locating lugs has broken off.
| IP: Logged