8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Fujicascope SH1

 - UBBFriend: Email this page to someone!    
Author Topic: Fujicascope SH1
Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 15, 2017 06:37 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Just been using my Fujicascope SH1 which I can thoroughly recommend to members as a beautifully produced piece of kit, (made for Fuji by Yamawa.) It's interesting that it has blazoned on it "Single-8"!
My only criticism is that the 25mm f/1.4 lens is not a zoom.
For those who dislike auto-threaders, here is a manual load projector with a fully swing-open all metal gate for easy cleaning. The lamp is 150 watt with Hi/Lo settings.
The side cover has an excellent loud-speaker, and sufficient space to store the mains lead, speaker lead, microphone, spare (400ft) spool and the instruction book. The whole assembly when clipped together has an overall clear plastic dust cover.
The Super 8 database (and Van Eck) says it has a spool capacity of 120m (400ft), but this is wrong, the spool arms accept 600ft spools. Perhaps some confusion has arising as it is supplied with a 400ft spool.
http://mimundoensuper-8.blogspot.co.uk/2016/08/fujicascope-sh1-mas-de-cuarenta-anos.html

--------------------
Maurice

 |  IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1785
From: London, UK
Registered: Jun 2014


 - posted January 15, 2017 07:17 AM      Profile for Brian Fretwell   Email Brian Fretwell   Send New Private Message       Edit/Delete Post 
Pity the lens is 25mm, but some non-zoom lenses had better contrast than early zoom ones. My 18mm lens from an Eumig 501D is very good in that respect.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 15, 2017 08:05 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
The lens is quite acceptable.
It gives a slightly bigger picture at the same throw as a standard 2" (50mm) lens on a 16mm projector.

--------------------
Maurice

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 17, 2017 10:29 PM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Maurice,

I picked up one of these recently in Japan and fell in love with it. Here in Japan, it was released as the Fujicascope SM1

Unfortunately, I'm having problems playing back sound on mine. I can use the microphone to produce sound through the speaker but whenever I play a magnetic film, it doesn't play any sound.

There are a few things I find unique to this machine like its body made out of wood, detachable speaker, circuit diagram pasted on the inside of the machine, and the small door on the back for accessing the inside of the machine without taking off the back case.

The fact that you can adjust the transformer from 100-240 is nice to have as well.

The SH1/SM1 was the first projector released by Fujifilm that can handle playback of a magnetic track.

The SM1 wasn't the first Single 8 projector when it was released in December of 1965. That distinction belongs to the Fujicascope M1 and M2 released in April 1965 when Single 8 debuted in Japan.

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 17, 2017 10:29 PM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 18, 2017 02:37 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Jason
I too, had problems with sound when first purchased. The sound head and pinch roller needed to be adjusted.

--------------------
Maurice

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 18, 2017 01:53 PM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Thanks Maurice. I followed your advice and now the sound is working.

The only other problems I'm having is that as I adjust the volume there is a lot of loud crackling and popping noises that come from the speaker.

In addition, sometimes when I turn on the amplifier, I have to tap on the volume dial for it to start working. I think I'll try cleaning around the switch to see if that helps.

The sound that comes from the wooden speaker sounds amazing.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 18, 2017 02:56 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Jason
In the old days in the Air Force we used to "lubricate" scratchy volume controls by operating them forwards and backwards many times. You could try this for a start.

--------------------
Maurice

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 18, 2017 08:16 PM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Thanks Maurice. I will have to try moving it forward and backwards a few times.

One thing I noticed in the blog that you linked to was a mention of the electrical socket in the projector. I don`t have the manual for the projector. So I`m curious what purpose this served.

I`m also curious if any of the zooms from the later models could easily be attached to the SH1.

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted January 19, 2017 02:17 AM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
quote:
In the old days in the Air Force we used to "lubricate" scratchy volume controls by operating them forwards and backwards many times. You could try this for a start.
This method solves the probelm because doing forwards and backwards many times will temporarily clean the dust on it, but usually it will come again. The best thing is to spray with Contact Cleaner and do forwards and backward for a couple of times.

--------------------
Winbert

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 19, 2017 03:55 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
The electrical socket is marked ROOM, the instruction book makes no mention of it, but I assume it is for plugging in a table lamp in a similar way to early silent standard 8 Eumigs. It goes off when the projector starts and comes again when the projector stops.

The carbon film volume control potentiometers are formed by depositing carbon graphite composition onto an insulating body, the varying resistance controlled by a moving contact. Over a period of time of non-use the slider makes a poor contact and produces a "scratchy" noise on the sound. By the constant moving backwards and forwards a slight deposit of carbon is applied.

Such pots are sealed and would rarely accumulate dust within them. Similarly, it may not be very easy to open them up to apply some form of lubrication. If all fails, then the whole unit should be replaced by a logarithmic pot.

--------------------
Maurice

 |  IP: Logged

Winbert Hutahaean
Film God

Posts: 5468
From: Nouméa, New Caledonia
Registered: Jun 2003


 - posted January 19, 2017 04:19 AM      Profile for Winbert Hutahaean     Send New Private Message       Edit/Delete Post 
quote:
Such pots are sealed and would rarely accumulate dust within them.
I don't know this model but usually at every potentiometer there is a small hole to apply this (spraying) contact cleaner.

--------------------
Winbert

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 19, 2017 10:33 AM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Thanks for the advice Winbert and Maurice.

I took out some of the screws and used a allen wrench to access the back of the panel. Because of the wires attached to the panel, I was only able to lift it up a few centimeters but I was able to find two holes near the pot. I sprayed some contact cleaner in them while working them back and forth. The crackling and popping noises that were coming from the speaker are now gone!

I wanted to reiterate that the sound that comes from the wooden speaker sounds great. I've used other detachable wooden and plastic projector speaker enclosures and this one holds it's own.

The lamp socket is a nice feature to have. I don't have any portable lamps in the room but it would be interesting if I could find a way for the projector to control the hard wired room lights.

This projector is really starting to grow on me. Even though it only has mono sound, I like the build quality and the way the film path is designed.I had thought about keeping a ST-180 around as small portable projector. However, I think I'll make this my go to projector for 600ft and under mono films that are projected at home.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 19, 2017 11:00 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Jason
That really is good news to hear. Glad we could help you.

--------------------
Maurice

 |  IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004


 - posted January 26, 2017 12:43 PM      Profile for Kevin Clark     Send New Private Message       Edit/Delete Post 
Maurice & Jason

I have two zoom lenses - boxed old stock - for the Fujicascope M2 which I am sure will fit the SH1.

The lenses are marked PSZ-Fujinon 1.5 19-32mm.

If you want one each all I would want is the cost of postage covered, the lenses are free.

Please see below two pictures to ensure they are the right ones for your machines:

 -

 -

Kevin

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted January 26, 2017 01:23 PM      Profile for Andrew Woodcock         Edit/Delete Post 
Tremendous generosity expressed there once again Kevin! [Smile] [Wink]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged

Jason Smith
Master Film Handler

Posts: 358
From: Tohoku, Japan
Registered: Oct 2015


 - posted January 26, 2017 07:37 PM      Profile for Jason Smith     Send New Private Message       Edit/Delete Post 
Thank you for the offer Kevin. If there is anyone else on the forum who could really use it, I would want them to have it before me.

Now that I know that the lens comes from the M2 projector, I could probably find a scrap M2 projector here in Japan and salvage one off of a machine.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 27, 2017 06:04 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Kevin
Looking at the pictures of your lens seem to show it quite wide and long, so I am sure it will not fit the SM1 which has a much smaller barrel.
However, thank you very much for the kind offer.

--------------------
Maurice

 |  IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004


 - posted January 27, 2017 03:16 PM      Profile for Kevin Clark     Send New Private Message       Edit/Delete Post 
Hello Andrew, always pleased to help our cine friends, too much kit here to know what to do with some days so my tidy up goes on.

Jason - no problem, also I will reply to your pm over the weekend. I have found another of these (making three in total) so you are still more than welcome to one if useful to you.

Maurice - I'm as certain as I can be that it is the same but the angle of my pictures may have distorted the lens size and shape somewhat. If you could measure the barrel length and diameter of your lens I will check it with mine to see if it matches - as I have three of these I honestly don't mind just sending you one anyway so we can confirm one way of another for the future reference of others too.

Kevin

 |  IP: Logged

Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012


 - posted January 27, 2017 07:41 PM      Profile for Andrew Woodcock         Edit/Delete Post 
[Smile] [Smile] [Wink]

Tidy up whenever you like for me Kevin!
I'm always a grateful recipient! [Big Grin] [Big Grin]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged

Nick Vermeirsch
Expert Film Handler

Posts: 110
From: West-Vlaanderen, Belgium
Registered: Jan 2014


 - posted September 14, 2019 11:02 AM      Profile for Nick Vermeirsch     Send New Private Message       Edit/Delete Post 
Hello all! I have just bought this nice machine, it gives a very clear and steady picture and i love the manual threading! But, i have the same sound issue as mentioned above: a crackling sound when i turn on the volume, i hear the soundtrack of the film on the background when projected, the crackle noises are still present. I have cleaned the sound head, but no big change. I read about the potentiometer, but this is new for me (where and how). Can someone give me some specific detail how to fix this problem with this projector? All the best and thanks in advance! [Big Grin]

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted September 14, 2019 11:18 AM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
The volume control might need cleaning? Get some contact cleaner and spray it! Try that and see what happens! Remember to spray the rear of the control!

 |  IP: Logged

Nick Vermeirsch
Expert Film Handler

Posts: 110
From: West-Vlaanderen, Belgium
Registered: Jan 2014


 - posted September 14, 2019 11:32 AM      Profile for Nick Vermeirsch     Send New Private Message       Edit/Delete Post 
I have opened the projector. Two blue wires enter the back of the volume knob. I see a little hole between the to points where they enter. This is the place to spray? Or another place in the potentiometer?

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted September 14, 2019 12:40 PM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Nick
Before you try to clean the volume control pot read my advice, above, dated January 19th, 2017.

--------------------
Maurice

 |  IP: Logged

Nick Vermeirsch
Expert Film Handler

Posts: 110
From: West-Vlaanderen, Belgium
Registered: Jan 2014


 - posted September 29, 2019 09:32 AM      Profile for Nick Vermeirsch     Send New Private Message       Edit/Delete Post 
Hello Maurice! Thanks for your advice, but turning the knob mnay times didn't help unfortunately... Would you have further advice? Also, i have three other questions about my version of this projector, hopefully you can help:
1) Picture 1: i suppose that there used to be a spring on the film tension idler on the left. Is this necessary, or can i do without?
2) Picture 2: on top, there is a metal piece fixed on the projector. Does anyone have an idea what the purpose was of this little thing?
3) Picture 3: on my lens, there is a red glass (filter?), that can swing open. What could be the purpose of this piece?
All the best!!

 -

 -

 -

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2