8mm Forum

my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm Forum   » Pathescope Ace and material of the film

 - UBBFriend: Email this page to someone!    
Author Topic: Pathescope Ace and material of the film
Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

 - posted November 06, 2015 01:08 PM      Profile for Luigi Castellitto   Email Luigi Castellitto   Send New Private Message       Edit/Delete Post 
After years of testing I realized that my Pathescope Ace in very good state, does not have the slightest problem with the triacetate films and with all the old commercial films and other, but with polyester films It does a little 'fatigue!
It does not go very bad, the vision is always enough, but the drag is not the best.
Someone with the Ace has never noticed this thing, or even someone with other projectors? Although it is difficult to understand, the polyester is very rare.

 |  IP: Logged

All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation