Wolverine-Hawkeye Telecine

[Stan Jelavic]

Managed to get he camera working. This is the model:
https://www.amazon.com/gp/product/B08D3KRVLQ/
As suspected the shading is very pronounced with the 16mm lens. There is a pinkish area in the center that becomes greenish towards the edges. Will share the screen shot tomorrow.

[Stan Jelavic]

That is the one I have Kamel.
All those speeds are possible. The main issues is how to tell the MSP that by using the switches. We only have speed and rewind inputs. Rewind is used for rewind and capstan. Speed is used to select the slow and fast speed so I thought to also use the slow speed for HDR and high speed - NO HDR. The turbo is not connected to the MSP so we cannot use that.

[Kamel Ikhlef]

Thanks Stan for your tests.

There is two models of this camera. one with lens M12 mount.

https://www.arducam.com/product/ardu...12-mount-lens/

according to your last switch hawkeys chart, we cannot yet have 0.5, 1 or 2 fps without hdr but with capstan ?
(if I understood correctly).

Thanks again for all your hard work to improve this telecine. What a road traveled!

[Stan Jelavic]

Tried the new 13MP camera today with the RPI. Ran into an issue with the driver (documentation petty poor). Posted the issue in Arducam forum but while I was there I noticed a note saying that the lens should not be changed due to lens shading (pink glow).
https://www.arducam.com/forums/search/ar1335/

That is exactly what I was my concern was. But I will still try to get it going and then probably just return it.

[Stan Jelavic]

Good progress David. Thanks for the tips.