With the Imagingsource cams price going higher and higher I was debating if I should switch to Arducam for Hawkeye.
Possibly something like this:
The Sony sensor should work ok with 12mm because the same sensor is used in products with the long focal length lenses.
The issue is that there is no external trigger.
The workaround is to use a usb mouse emulator and trigger it with the Wolverine sync.
Then use the Workprinter like software for capture.
I already developed several sw versions that should work ok for this purpose.
The cost should run around $260 and that includes everything including a few $$ for my labor and test.
Wolverine unit also included.
Again, would keep the whole design open source.
Just a thought.
Possibly something like this:
The Sony sensor should work ok with 12mm because the same sensor is used in products with the long focal length lenses.
The issue is that there is no external trigger.
The workaround is to use a usb mouse emulator and trigger it with the Wolverine sync.
Then use the Workprinter like software for capture.
I already developed several sw versions that should work ok for this purpose.
The cost should run around $260 and that includes everything including a few $$ for my labor and test.
Wolverine unit also included.
Again, would keep the whole design open source.
Just a thought.
Comment